ISO9001 Quality ManagementNational High-Tech Enterprise100 Software Copyrights
Service Promise Applications 400-8127-833
MEASUREMENT ADVISOR · Measurement advisor

Tell us what you need to measure,get a measurement plan in 10 seconds

You do not need to know instrument categories. Pick a test task, describe the sample, and the system matches models from 1067 products in stock, then returns a fixture list, a test procedure and the applicable standards — a plan you can take straight into a meeting.

1067models in stock
7test domains
44standards referenced
1working-day reply

What are you working on?

  • I have samples but cannot decide between hardness and metallography
  • The customer requires a GB/T report, but the equipment is unclear
  • I need a budget proposal with configuration and workflow
  • Our current instrument cannot handle large, thin or hot samples
Start at step 1 ↓
MATCHED · matched

Measurement plan for “Hardness & heat treatment”

Inputs: Not specified · Not specified · Routine QC

Change inputs
SHANGHAI MICROCRE OPTICS-MECH TECH CO.,LTDSHANGHAI MICROCRE OPTICS-MECH TECH CO.,LTD
Measurement plan (draft)2026-11-12
Test taskHardness & heat treatment
Sample materialNot specified
Sample sizeNot specified
Accuracy classRoutine QC
StandardGeneral standard
Recommended modelYHRI-45M
Plan notes

Based on your inputs (Hardness & heat treatment, Not specified, Not specified), the closest match is YHRI-45M, whose published data include Hardness Resolution 0.1HR, Test force dwell time (s) 3 种试验力保荷满足特殊材料使用。. Two alternatives are listed so you can compare range, resolution and configuration depth before deciding. Please check three things before ordering: whether the specimen can be prepared to the required surface finish, whether the fixture matches your part geometry, and which edition of the standard your acceptance test refers to. Next step: send 3–5 representative samples for a free trial and we will return measured data with a formal quotation.

Generated by the rules engine; a model can rewrite it in natural language

1. Recommended configuration

ParameterYHRI-45MHMAS-HTHMAS-DS
Max Specimen Height175mm—85mm
Overall Dimensions540 × 215 × 750mm (L × W × H)—460X230X490mm
Test force dwell time (s)3 种试验力保荷满足特殊材料使用。——
Hardness Resolution0.1HR——
BrandMICROCREMICROCREMICROCRE
Spec items204027

2. Fixtures and consumables

  • Certified hardness blocks (high/mid/low) for daily verification
  • Fixtures: thin sheet, wire, irregular parts
  • Sectioning & mounting press for case-depth cross-sections
  • Data software and report templates

3. Test procedure

  1. 01

    Sampling & ID: define test points per standard or drawing, record furnace batch

  2. 02

    Specimen prep: sectioning, mounting, grinding/polishing, etch if a case depth profile is required

  3. 03

    Select scale & load: Rockwell / Vickers / micro-Vickers by hardness range and case depth

  4. 04

    Multi-point measurement: ≥3 points per part, accept/reject per standard

  5. 05

    Reporting: keep raw data and photos for traceability

4. Applicable standards

GB/T 230.1Metallic materials — Rockwell hardness test — Part 1: Test methodGB/T 231.1Metallic materials — Brinell hardness test — Part 1: Test methodGB/T 4340.1Metallic materials — Vickers hardness test — Part 1: Test methodGB/T 17394.1Metallic materials — Leeb hardness test — Part 1: Test methodGB/T 18449.1Metallic materials — Knoop hardness test — Part 1: Test method

5. Service and delivery

  • Free sample test: send parts, receive measured data
  • Delivery: first commissioning free, on-site training
  • Warranty: one year; free software updates for the same major version
  • Quotation by final configuration, tax and freight included, VAT invoice available
Technical review400-8127-833
Emailshanghai@yr17.net
AddressNo.1478 Nanfeng Highway, Fengcheng Town, Fengxian District, Shanghai 201411, China

This plan is generated from published specifications to narrow the selection. Final configuration, price and lead time are subject to the signed technical agreement.

Have an engineer review this plan

Send sample photos, drawings or the test standard; an engineer replies within one working day with test advice and a formal quotation.

Submit for review 400-8127-833
1 / 3
01What do you need to measure?Pick the closest test task — no need to know the instrument name
02What is the sample?Material and size determine range, fixture and preparation

Material

Size / form

Accuracy class

03Any other requirements?Standard, quantity, special conditions — the more you specify, the better the match

Quantity / usage

Results are visible without contact details; leave a phone only for engineer review.