STANDARDS

Standards and verification regulations

GB/T test methods, JJG verification regulations and ISO/ASTM international standards for hardness, metallography, dimensional metrology and environmental testing — 44 entries grouped by product line.

All 硬度计17 试验机8 金相制样4 显微镜6 几何量4 环境试验4 分析仪器4

GB/TNational standard29 项

Standard	Title	Scope
GB/T 230.1	Metallic materials — Rockwell hardness test — Part 1: Test method	试验方法	Products
GB/T 231.1	Metallic materials — Brinell hardness test — Part 1: Test method	试验方法	Products
GB/T 4340.1	Metallic materials — Vickers hardness test — Part 1: Test method	试验方法	Products
GB/T 17394.1	Metallic materials — Leeb hardness test — Part 1: Test method	试验方法	Products
GB/T 18449.1	Metallic materials — Knoop hardness test — Part 1: Test method	试验方法	Products
GB/T 21838.1	Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method	试验方法	Products
GB/T 2611	Testing machines — General technical requirements	产品标准	Products
GB/T 16491	Electronic universal testing machines	产品标准	Products
GB/T 3159	Hydraulic universal testing machines	产品标准	Products
GB/T 3808	Verification of pendulum-type impact testing machines	产品标准	Products
GB/T 16825.1	Metallic materials — Calibration and verification of static uniaxial testing machines	检定依据	Products
GB/T 1040.1	Plastics — Determination of tensile properties — Part 1: General principles	试验方法	Products
GB/T 228.1	Metallic materials — Tensile testing — Part 1: Method of test at room temperature	试验方法	Products
GB/T 229	Metallic materials — Charpy pendulum impact test method	试验方法	Products
GB/T 13298	Inspection methods for microstructure of metallic materials	试验方法	Products
GB/T 6394	Determination of estimating the average grain size of metal	试验方法	Products
GB/T 10561	Steel — Determination of content of nonmetallic inclusions — Micrographic method	试验方法	Products
GB/T 11354	Determination of nitrided case depth and metallographic examination	试验方法	Products
GB/T 2985	Biological microscopes	产品标准	Products
GB/T 22058	Microscopes — Stereomicroscopes — Information provided to the user	产品标准	Products
GB/T 24762	GPS — Acceptance and reverification tests for imaging measuring instruments	产品标准	Products
GB/T 1957	Plain limit gauges — Technical specifications	产品标准	Products
GB/T 1800.1	GPS — ISO code system for tolerances on linear sizes	基础标准	Products
GB/T 10592	Specifications for high/low temperature test chambers	产品标准	Products
GB/T 10125	Corrosion tests in artificial atmospheres — Salt spray tests	试验方法	Products
GB/T 2423.1	Environmental testing — Part 2: Tests — Test A: Cold	试验方法	Products
GB/T 4336	Carbon and low-alloy steel — Determination of multi-element contents — Spark discharge atomic emission spectrometric method	试验方法	Products
GB/T 11170	Stainless steel — Determination of multi-element contents — Spark discharge atomic emission spectrometric method	试验方法	Products
GB/T 4956	Non-magnetic coatings on magnetic substrates — Measurement of coating thickness — Magnetic method	试验方法	Products

JJGNational verification regulation6 项

Standard	Title	Scope
JJG 112	Verification Regulation of Metallic Rockwell Hardness Testers	检定规程	Products
JJG 150	Verification Regulation of Metallic Brinell Hardness Testers	检定规程	Products
JJG 151	Verification Regulation of Metallic Vickers Hardness Testers	检定规程	Products
JJG 1047	Verification Regulation of Metallic Knoop Hardness Testers	检定规程	Products
JJG 747	Verification Regulation of Leeb Hardness Testers	检定规程	Products
JJG 202	Verification Regulation of Autocollimators	检定规程	Products

JJFNational calibration specification1 项

Standard	Title	Scope
JJF 1101	Calibration Specification for Temperature and Humidity Parameters of Environmental Test Chambers	校准规范	Products

JB/TMachinery industry standard1 项

Standard	Title	Scope
JB/T 9324	Metallurgical microscopes	行业标准	Products

NB/TEnergy industry standard1 项

Standard	Title	Scope
NB/T 47013.1	Nondestructive testing of pressure equipments — Part 1: General requirements	行业标准	Products

ISOInternational standard3 项

Standard	Title	Scope
ISO 14577-1	Metallic materials — Instrumented indentation test for hardness and materials parameters	国际标准	Products
ISO 6508-1	Metallic materials — Rockwell hardness test	国际标准	Products
ISO 6507-1	Metallic materials — Vickers hardness test	国际标准	Products

ASTMASTM standard3 项

Standard	Title	Scope
ASTM E2546	Standard Practice for Instrumented Indentation Testing	国际标准	Products
ASTM E18	Standard Test Methods for Rockwell Hardness of Metallic Materials	国际标准	Products
ASTM E384	Standard Test Method for Microindentation Hardness of Materials	国际标准	Products

How to use

Always refer to the currently valid edition. Numbers here omit the year; state the edition year in purchase and acceptance documents.
JJG are verification regulations used for annual metrology inspection; GB/T are test-method or product standards used for acceptance and test reports.
Export projects often require ISO 6507/6508 together with ASTM E18/E384; matching calibration certificates ship with the machine.