这个行业通常查什么
- 表面硬度
- 硬化层深度梯度
- 渗碳/渗氮层
- 晶粒度
- 脱碳层
客户最常问的一个问题
渗碳层深度用金相法和硬度法测出来差 0.1mm,以哪个为准?
把试样尺寸、材料牌号与执行标准发给我们,工程师会给出判定方法与设备配置,可先寄样试测。
提交这个问题 →Heat treatment
Case depth, diffusion layer and microstructure are the deliverables of heat treatment; hardness gradients are the evidence.
12款推荐机型5项常检项目4referenced standards
推荐机型
PREMIUMBUILDMICROCRE
YHRI-45M Sensor Digital Superficial Rockwell Hardness Tester
Rockwell Hardness Testers
Model YHRI-45M
Details
PREMIUMBUILDMICROCRE
HMAS-UHT1700CM Full Temperature Range 1600℃ Dynamic Characterization Ultra-High-Temperature Indentation Tester
High-Temperature Hardness & Indentation Testers
Model HMAS-UHT1700CM
Details
PREMIUMBUILDMICROCRE
ZQ-30D Intelligent Automatic Precision Cutting Machine
Metallographic Cutting Machines
Model ZQ-30D
Details
MICROCRE
4XC Series Trinocular Inverted Metallurgical Microscope
Metallurgical Microscopes
Model 4XC
Details
MICROCRE
MMAS-4 Metallurgical Microscope Measurement & Analysis System
Metallurgical Microscopes
Model MMAS-4
Details
MICROCRE
MMAS-5 Metallurgical Microscope Measurement & Analysis System
Metallurgical Microscopes
Model MMAS-5
Details
MICROCRE
MMAS-6 Metallurgical Microscope Measurement & Analysis System
Metallurgical Microscopes
Model MMAS-6
Details
MICROCRE
MMAS-8 Metallurgical Microscope Measurement & Analysis System
Metallurgical Microscopes
Model MMAS-8
Details
MICROCRE
MMAS-9 Metallurgical Microscope Measurement & Analysis System
Metallurgical Microscopes
Model MMAS-9
Details
MICROCRE
MMAS-12 Metallurgical Microscope Measurement & Analysis System
Metallurgical Microscopes
Model MMAS-12
Details
MICROCRE
MMAS-15 Metallurgical Microscope Measurement & Analysis System
Metallurgical Microscopes
Model MMAS-15
Details
MICROCRE
MMAS-16 Metallurgical Microscope Measurement & Analysis System
Metallurgical Microscopes
Model MMAS-16
Details
以上机型按行业常用配置排序;试样尺寸特殊或需要非标工装时,可按下单要求定制。
WeChat
Channels
Douyin