SHANGHAI MICROCRE OPTICS-MECH TECH CO.,LTDSHANGHAI MICROCRE OPTICS-MECH TECH CO.,LTD

400-8127-833shanghai@yr17.netNo.1478 Nanfeng Highway, Fengcheng Town, Fengxian District, Shanghai 201411, Chinawww.yr17.net

Updated 2026-11-12 · Model XQ-2B

Metallographic Preparation

PREMIUMBUILDMICROCREModel XQ-2BAlso available as a premium build: higher accuracy and calibration standard

Manual Metallographic Sample Mounting Press XQ-2B

Updated 2026-11-12Category Metallographic Preparation

定时控制0–99分钟

ModelXQ-2B

CategoryMetallographic Preparation

CustomizationCustom builds supported

Get Quote & Selection Advice Generate a measurement plan

400-8127-833 Generate proposal

Genuine Product

Nationwide Shipping

1-Year Warranty

VAT Invoice Available

Overview

No translation available yet — Chinese original below Full description (Chinese original) ↓

Page summary:Manual Metallographic Sample Mounting Press XQ-2B is a Metallographic Preparation product (model XQ-2B), manufactured by Shanghai Microcre Optics-Mech Tech Co., Ltd. Key specifications: Model = XQ-2B; Temperature control = Automatic; 试样压制规格 = 可选 Φ25mm，Φ30mm，Φ40mm; 加热器规格 = Φ25/Φ30mm：650W；Φ40mm：800W; 温度调节范围 = Room temperature -300℃; 定时控制 = 0-99 min. Contact: 400-8127-833 / shanghai@yr17.net.

For detailed datasheets in English, please contact our sales engineers.

XQ-2B Specifications

Structure & travel3

Stage, travel, dimensions and weight — siting and fixturing

试样压制规格: 可选 Φ25mm，Φ30mm，Φ40mm
Overall dimensions: 320 * 280 * 420mm（长 * 宽 * 高）
Net Weight: 22KG

Loading & control1

Loading mode, speed, dwell and software interfaces

定时控制: 0 – 99min

Power & environment4

Power, consumption and ambient requirements

Temperature control: Automatic
温度调节范围: Room temperature -300℃
Power Supply: 220V
Power supply 线: 一根

Accessories & configuration1

Standard, optional and supplied-with items

Main Unit: 一台

Other1

Additional notes

加热器规格: Φ25/Φ30mm：650W；Φ40mm：800W

Specifications vary with configuration — confirm the final technical agreement with our engineer. Optional items are priced separately.

Temperature control	Automatic
试样压制规格	可选 Φ25mm，Φ30mm，Φ40mm
加热器规格	Φ25/Φ30mm：650W；Φ40mm：800W
温度调节范围	Room temperature -300℃
定时控制	0-99 min
Power Supply	220V
Overall dimensions	320 * 280 * 420mm（长 * 宽 * 高）
Net Weight	22KG
Main Unit	一台
Power supply 线	一根

Some specification values are given in the original Chinese wording; ask our engineers for an English datasheet.

Full description (Chinese original)

The English text on this page summarises the model and specifications. The full technical description is the Chinese original below; an English datasheet is available from our engineers on request.

一、产品简介： XQ-2B 型金相试样镶嵌机 ( 以下简称镶嵌机 ) 适用于对不是整形、不易手拿的微小金相试样进行热固性塑料压制 . 成形后可方便地进行试样磨抛操作 , 也有利于在金相显微镜下进行显微组织测定 . 二、结构特征 : XQ-2B 型手动金相试样镶嵌机本机系机械式镶嵌机 , 旋转机体外手轮 , 通过一对锥齿轮带动机体内丝杆使压制试样的下模在钢模套内上下移动 , 热固性塑料连同镶嵌的试样在加热条件下成形 . 试样制备过程中的成形压力由固定在机体内的弹簧自动补偿 , 试样压制的压力可由信号灯给以指示 . 本机配有智能型数字显示温控器 , 设定时间，和蜂鸣报警 , 温度传感器采用热电偶 . 本机具有高灵敏度、高精度 , 有温度显示 , 易观察又易操作等优点 . 三、工作环境 : 1. 海拔高度不超过； 2. 周围介质温度不高于 + , 及不低于； 3. 空气在相对湿度不大于 85% （在时）； 4. 周围没有导电尘埃、爆炸性气体、及能严重破坏金属和绝缘的腐蚀性气体； 5. 没有明显的振动和颠簸四、技术参数 :

Applicable standards

本机型的设计与验收依据下列标准；采购文件引用时请注明版本年份。

GB/T 13298Inspection methods for microstructure of metallic materials试验方法 GB/T 6394Determination of estimating the average grain size of metal试验方法 GB/T 10561Steel — Determination of content of nonmetallic inclusions — Micrographic method试验方法 GB/T 11354Determination of nitrided case depth and metallographic examination试验方法

查看完整标准库 →

Selection FAQ

Can the configuration of XQ-2B be adapted to my application?

Yes. Beyond the standard configuration, measuring range, fixtures, optics and software functions can be adapted. Send your sample and test requirements and our engineers will return a configuration list and quotation.

Can I test my samples before ordering?

Yes. Samples can be mailed to our Shanghai Fengxian laboratory for free testing with a written report, or you can book an on-site demonstration to confirm the workflow and data format.

How are lead time, installation and after-sales service handled?

Standard configurations usually ship within 15-30 working days, including first installation, commissioning and operator training. The instrument carries a one-year warranty and software upgrades are free for life.

General information only — final configuration and applicable conditions are subject to the mutually confirmed technical document.

After-Sale & Selection Support

Sample Testing

Free testing of mailed samples
Factory demo by appointment
Written test proposal provided

Delivery & Training

Free first installation & commissioning
On-site operation training
One-year full warranty

Custom Builds

Fixtures, ranges and software customizable
Automation line integration
Lifetime free software upgrades